At Broadway Towers in Revere, Massachusetts, one of the most revealing places to look for winter salt damage was beneath the drains. Vehicles carried salt-laden water onto the parking deck. Below, wide-flange steel beams and composite decking showed severe corrosion, particularly under the garden and parking deck drains. In several areas, concrete had spalled, exposing more steel.
For the project team, the challenge was how to protect the exposed beams before insulating foam covered them. The planned work had to account for the condition of the existing paint, access to the steel and adhesion between successive layers.
How the crew treated the beams
Prepare the steel. Crews used power wire brushes to remove peeling paint, loose rust and surface contaminants. This preparation eliminated the need for white-metal sandblasting on the project.
Apply SURTREAT VCI Primer. Crews sprayed the primer directly onto all exposed steel beams. It forms a protective film on the prepared steel and contains a vapor-phase corrosion inhibitor designed to migrate to exposed metal in hard-to-reach areas.
Complete the finish. The crew applied insulating foam over the primed beams, followed by a urethane topcoat. SURTREAT’s case study reports that the layers adhered successfully in this installation.
For garage owners and engineers, Broadway Towers offers a practical starting point for planning repairs. Trace the path of saltwater from the driving surface to the framing below. Look for patterns in the damage around drains, document the condition of the exposed beams and have the structural engineer evaluate any steel section loss. Those findings help define where structural repair is needed and where corrosion protection belongs in the work.
Planning repairs in a garage with exposed steel beams? Share photos of the framing beneath your drains and the finish system you’re considering. SURTREAT can review surface preparation, primer application and coating compatibility with your project team.
JF Jad